Posts Tagged droop
I’ve been working on applying torques to the creatures in a meaningful and well thought out manner (read: banging my head against the keyboard whilst trying to fix all the horrible signage errors). The original intention was to simply pass the torques on to the energy system and let natural selection weed out the unbalanced and physically impossible specimens. But I realised I have the perfect opportunity to overhaul a system that has bothered me since its inception: the quadruped system.
Logically, if a creature has slightly smaller front limbs than back limbs, it should lean forward in order to walk on them (unless it’s a pangolin, but they’re too awesome to be swayed by our petty logic).
Without something to enforce this, every creature in Species ALRE would be a biped, because every creature has at least a *slightly* different leg size.
The quadruped system governs how this is implemented. A hideously simplified description would be “if the torso rotation is less than 45 degrees, and it has fore or back legs, the creature will fall forward onto its front legs or chest. If it’s higher than 45 degrees, or it has mid-legs, it will remain bipedal.”
That “45 degrees” is completely arbitrary. It’s just a value I picked.
This system is why ‘head-down butt-up’ creatures, whose bodies hang forward from their back legs are so common: Any creature with large back legs and a small torso rotation will end up with this body plan.
That’s the old system. The new one is much more sophisticated.
It starts by completely eliminating the quadruped system: creatures will initially be created *exactly* as their genes would have them (ie. with only one pair of their legs reaching the ground). It then calculates the skeleton and torques as normal.
Once that’s done, it passes control to the droop system. This applies “droops” to every body part attached to the torso: limbs, neck and tail. Legs are bent upwards by the reaction force on their legs, neck and tail are bent downwards, and the torso droops based on the creature’s balance, all in direct proportion to the torque applied on the joints.
If a body part droops into the ground, it stops drooping and adds a ground contact point, which will take some of the creatures weight in the next step.
Then pass 2 starts, the body-plan is completely reinitialised: bones are regenerated, torques and forces are recalculated. The results of pass 2 are what the creature will ultimately use for most of it’s energy calculations, so as to take advantage of the creature new quadrupedal body plan. (physical droops will affect energy, but proportionally to how much they rotate rather than as a function of torque. Small drops onto legs will be a negligible cost)
This also has a noticeable effect on creature appearances. I haven’t adjusted the rotation genes at all in the following screenshot: these variations are entirely the result of torso, neck and tail thickness changes causing different torques in the creature’s body plan.
One particularly noticeable change is that the creatures tail now has an effect: increasing its mass is the only way to counter the torque produced by the head and neck in the second body plan. For bipeds with centrally situated legs (raptor-like creatures), a sizable tail will be the only way to maintain balance (other than having an upright torso rotation gene and incurring a large energy cost in droop).
I’m hoping this system will be realistic enough to promote life-like body plans in place of a real-time physics system, which would be far too CPU intensive to implement across thousands of creatures. More likely, it will be exploited ruthlessly in ways I can’t yet imagine. But hey, that’s what makes it fun!
“Anime references. There goes the neigbourhood”